Compare roofing companies in Tampa
Up to 3 free quotes from Tampa-area roofers, and what a new roof costs here: about $6 to $8.50 per square foot for shingles.
Tell us about your roof
We’ll estimate a cost range using typical Florida installed prices for your material, home size and number of stories.
Your Tampa estimate
Based on your selections
Roof pitch, how much decking needs replacing, and any wind mitigation work your house needs at reroofing will move the final number. Quotes from Tampa roofers who have seen your roof are the only way to know your actual cost.
Get exact quotes from Tampa roofers
Get free quotes from Tampa roofers
Up to 3 Tampa-area roofers from Networx’s network will contact you with their quotes.
Your details go to Networx, our matching partner, which shares them with up to 3 local roofers. We’re paid a referral fee by Networx, not by you. How it works · Privacy policy.
Getting roofing quotes in Tampa
Fill in the form above and our matching partner Networx will pass your request to up to three Tampa-area roofing companies that cover your ZIP code. Each one contacts you directly, looks at the roof and gives you its own quote. It costs you nothing, and you don’t have to hire any of them.
In Tampa, the quotes for the same roof often differ because of what the code requires on your particular house, not because one roofer is cheaper. The sections below show what a fair Tampa price looks like, which dates in your home’s history change the job, and how to check a roofer before you sign.
How much does a new roof cost in Tampa?
A new architectural shingle roof in Tampa costs about $6 to $8.50 per square foot installed, or roughly $13,800 to $19,550 on a typical 2,000 sq ft house with about 2,300 sq ft of roof. That’s above our national roof cost guide, where the same shingles run $4.50 to $7.50.
| Roof area | Architectural shingles ($6–$8.50/sq ft) |
Standing seam metal ($10–$16/sq ft) |
Concrete tile ($11–$20/sq ft) |
|---|---|---|---|
| 1,800 sq ft | $10,800–$15,300 | $18,000–$28,800 | $19,800–$36,000 |
| 2,300 sq ft | $13,800–$19,550 | $23,000–$36,800 | $25,300–$46,000 |
| 3,000 sq ft | $18,000–$25,500 | $30,000–$48,000 | $33,000–$60,000 |
Measure quotes against roof area, not house size. A roof is usually 10 to 20 percent bigger than the floor it covers, and more on a steep one. When the quotes arrive, check that each roofer measured roughly the same area; a quote that looks cheap sometimes just counts less roof. Then check the decking: nobody knows how much is rotten until the old roof is off, so a fair quote gives a price per sheet rather than “as needed”.
Per-square-foot rates from RoofingCalc’s Florida cost data, updated March 2025. RoofingCalc doesn’t break out Tampa, so these are its statewide shingle figures; it puts central Florida at $6.50 to $8.50 and north Florida at $6 to $8.
Why two Tampa quotes for the same roof don’t match
Start with the year your house was built. If it was before the Florida Building Code took effect on March 1, 2002, a reroof has to include re-nailing the roof deck and a secondary water barrier, and in a wind-borne debris region a home valued at $300,000 or more must also put up to 15% of the cost into stronger roof-to-wall connections. One roofer may have priced all of that and another none of it. Ask each one, in writing, which of these items their price includes. You can check whether your address is in a wind-borne debris region on the University of Florida’s wind speed and debris region maps.
Then the year the roof was last replaced. A roof done under the 2007 code or later is exempt from the old 25% rule, so a repair to part of it doesn’t force a whole new roof. If a roofer recommends full replacement after damage to one section of a newer roof, ask why.
Tampa has one more thing to check. If your house is in one of the city’s local historic districts, such as Seminole Heights, replacing the roof needs a Certificate of Appropriateness before work starts. Under the Seminole Heights design guidelines, staff can approve a like-for-like replacement, but a change of material goes to review, which matters if you’re pricing metal to replace shingles. Ask roofers whether they’ve handled historic district permits before. Other cities run this differently; in two of Orlando’s historic districts, for example, re-roofing with matching materials is a minor review.
Our Florida guide sets out each of these rules and its source.
How matching works, and how to check a Tampa roofer
When you request quotes, your details go to Networx, our matching partner. Networx screens contractors before they join its network, and we don’t check them ourselves, so a few minutes of checking is worth it. Florida makes that easier than most states, because roofers have to be licensed. Look up each company on the state licensing site and confirm the license is active and is a roofing or general contractor license. A certified contractor can work anywhere in Florida; a registered one only where they qualified.
Watch the deposit. A roofer who takes more than 10% up front must apply for permits within 30 days and start within 90 days of the permits being issued, under section 489.126. Ask for the payment schedule in writing, and for a copy of the permit once it’s issued. Our questions to ask a roofer cover the rest.
Roof repair and inspection in Tampa
Not every leak needs a new roof. Most roof repairs cost about $400 to $2,000 nationally, and a leak with no damage inside usually runs $360 to $1,550; our roof repair cost guide has prices for each common problem. If the roof was replaced under the 2007 code or later, a repair to part of it only has to bring that part up to code.
There are two kinds of inspection worth knowing apart. A roof inspection tells you the roof’s condition and is often free when a roofer is quoting work. A wind mitigation inspection fills in the state’s form for your insurer and is what earns wind discounts; the state’s My Safe Florida Home program has offered these free to eligible homeowners.
Metal roofing in Tampa
Standing seam metal costs about $10 to $16 per square foot in Florida, or roughly $23,000–$36,800 on a typical 2,000 sq ft house, against $13,800–$19,550 for architectural shingles. It lasts far longer, so over a full lifetime the cost per year comes out close to shingles. That makes metal a decision about how long you’ll stay rather than a cheaper roof; our metal vs shingles comparison works through it.
In Tampa, check two things before you choose it. If you’re in a historic district, switching from shingles to metal goes to design review. And ask your insurer how a metal roof would be recorded on your wind mitigation form, so you know what it does to your premium before you pay for it.
Permits and insurance claims in Tampa
Your roofer should pull the building permit for a reroof. Inside city limits, permits come from the City of Tampa’s Construction Services Division, which runs an online permit system and an active permits map, and answers permit questions on (813) 274-3100, option 1. Ask for the permit number and check it yourself before work starts.
If insurance is paying, three Florida rules apply. Notice of a claim has to reach your insurer within one year of the date of loss. On a policy issued on or after January 1, 2023, you can’t sign your benefits over to a roofer. And a roofer can’t interpret your policy for you unless they’re a licensed public adjuster. Our guide to getting your roof paid by insurance covers the process.
Tampa roofing questions
Related guides
Last updated October 2026.
See what Tampa roofers would charge for your roof
Up to 3 free quotes from local roofers, matched through our partner Networx. No obligation to hire.
Get free quotes